How To Fix ? P0068 : MAP/MAF – Throttle Position Correlation

What does the P0068 : MAP/MAF – Throttle Position Correlation mean?

The P0068 code is a generic powertrain code that suggests a correlation error between the Manifold Absolute Pressure (MAP) sensor, the Mass Airflow (MAF) sensor, and the Throttle Position Sensor (TPS).

When the error code P0068 is triggered, it signifies that the Engine Control Module (ECM) or Powertrain Control Module (PCM) is unable to validate the information provided by these sensors.

Is it Safe to Continue Driving with the P0068 Code?

Technically, you can continue driving the vehicle with the P0002 code present. However, it is recommended to address the issue as soon as possible to prevent any potential damage to the engine.

What are the Symptoms of P0068 code?

The common symptoms of the P0068 code include:

1. Check engine light illuminated: The check engine light illuminates when there is an issue with the engine management system. A persistent P0068 code may trigger the check engine light to turn on, indicating a problem with the Manifold Absolute Pressure (MAP) sensor, the Mass Airflow (MAF) sensor, and the Throttle Position Sensor (TPS).
   
2. Engine performance may be affected, leading to rough running or hesitation: With the P0068 code activated, the Engine Control Module (ECM) may not receive necessary sensor data related to the air flow control circuit to maintain the air/fuel ratio at 14.7:1. This can result in rough running or hesitation, impacting the overall performance of the engine.
   
3. Visible exhaust emissions: Visible exhaust emissions may be observed while driving due to a lean or rich air-fuel mixture resulting from the P0068 code.
   
4. Engine stalling: Intermittent engine stalling may occur due to faults in the intake air control circuit associated with the P0068 code.
   
5. Lack of power: Lack of power during acceleration may occur due to the P0068 code, which affects the engine air intake system, leading to inadequate or excessive air supply to the engine.
   
6. Poor Fuel Efficiency: Inefficient fuel consumption may be observed as a symptom of the P0068 code, as it affects the proper regulation of the air/fuel ratio due to either the absence of sensor data or a mechanical problem with the throttle valve. This can result in the wastage or improper utilization of fuel.
   

What causes the P0068 code?

Causes of the P0068 code can vary and include the following:

1. Electrical Wire Issues: This encompasses poor connections across electrical connectors, broken wiring, blown fuses, loss of ground, or issues with previously repaired wires. Any problem that disrupts the connection with the MAF, MAP, and TPS sensors can trigger the P0068 code.
   
2. Faulty Manifold Absolute Pressure (MAP) sensor: If the Manifold Absolute Pressure (MAP) sensor is defective or malfunctioning, it can cause irregularities in injector timing and spark advance, which are necessary to maintain a 14.5:1 fuel ratio, leading to the P0068 code.
   
3. Faulty Mass Airflow (MAF) sensor: A faulty Mass Airflow (MAF) sensor can disrupt the correlation between the Manifold Absolute Pressure (MAP), Mass Airflow (MAF), and Throttle Position Sensor (TPS), resulting in the occurrence of the P0068 trouble code.
   
4. Faulty Throttle Position Sensor (TPS): A malfunctioning Throttle Position Sensor (TPS) can disrupt the synchronization between the Manifold Absolute Pressure (MAP), Mass Airflow (MAF), and Throttle Position Sensor (TPS), leading to the triggering of the P0068 trouble code.
   
   
5. Vacuum Leak: A vacuum leak through hoses or connections can potentially trigger the P0068 trouble code.
   

How to Diagnose & Fix the P0068 Code?

Diagnosing the P0068 code requires specialized diagnostic tools and equipment. However, here are some methods you can use yourself to diagnose and potentially fix the issue:

1. Check for Other Codes:
   
   • Diagnose: Look for any additional diagnostic trouble codes (DTCs) that may be present. These could provide clues about related issues contributing to the P0068 code.
     
   • Fix: Address any other codes that are present, as resolving these may also resolve the P0068 code.
     
2. Check for Electrical Wire Issues:
   
   • Diagnose: Inspect the electrical wiring related to these sensors for any signs of damage, such as frayed wires, loose connections, or corroded terminals. Check fuses and relays related to the sensor circuit.
     
   • Fix: Replace any damaged wiring, tighten loose connections, and replace any blown fuses or faulty relays.
     
3. Inspect Sensors:
   
   • Diagnose: Visually inspect each of these sensors one by one for any signs of dirt, debris, or damage.
     
   • Fix: If you observe any dirt or debris, clean it. If there are any signs of damage, replace the sensor with a new one.
     
4. Inspect Vacuum Leaks:
   
   • Diagnose: Check for any leaks in the vacuum system. Inspect the vacuum hoses and connections for any cracks or damage. You can also use a can of carburetor cleaner to spray around the vacuum lines and connections while the engine is running. If the engine idle changes, it indicates a leak.
     
   • Fix: Replace or repair the damaged vacuum hoses or connections. Ensure they are properly sealed to prevent any vacuum leaks.

How to Prevent the P0068 Code?

To prevent the occurrence of the P0068 code, it’s important to implement routine maintenance and take proper care of the air intake system. Here are some preventative measures:

1. Regularly change the air filter: Change the air filter according to the manufacturer’s recommendations to prevent clogs and airflow restrictions in the intake system.
   
2. Use high-quality air filter: Opt for high-quality air filters to ensure efficient filtration and airflow in the intake system.
   
3. Regularly inspect and clean the vacuum line: Periodically inspect the vacuum lines, connections, and components for wear, leaks, or damage. Clean any debris or buildup to maintain proper vacuum pressure.
   
4. Regular inspection and cleaning of the fuse box: Ensure the fuse box and associated electrical components are inspected and maintained regularly. Clean any corrosion or buildup that may affect electrical connections and functionality.